How to Set up Openport for Nissan Consult 3 Plus?

 We have pointed out how to configure J2534 passthru devices (Godiag j2534, 5054a, PCMTuner, SM2 pro) for Nissan Consult III Plus software.

How to Configure Nissan Consult III+ with Passthru Devices?

Here we show how to set up Tactrix Openport  2.0 with Nissan Consult 3 plus specifically.

Got the Openport 2.0 clone cable

Nissan Consult version 73 downloaded online

Need to configure diagnostic tool.ini to let the software see the adapter
Where is the folder in which you need to correct this file
C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting
There we edit/replace the DiagnosticTool.ini file with the one we made and everything will work.

At first it was like this

Then like this

Incorrect configuration

Install openport driver

To do this, download Link openport driver

The driver file is located in the folder C:\Program Files (x86)\OpenECU\OpenPort 2.0\drivers

 

After install driver and configure DiagnosticTool.ini

it works fine with openport.

Related reading:

How to Use Godiag J2534 with Nissan Consult III+?

How to Configure Porsche PIWIS3 for J2534 Passthru?

 Free download Porsche PIWIS III 38.400 VMware software for passthru devices. The software is updated and modified for PassThru.

 

Compatible devices: 

VAS 5054A

Scanmatik 2 PRO (SM2 Pro)

Openport 2.0

Godiag GD101

VNCI 6154

Cl0ne VAS 6154

VXDIAG VCX SE 6154

Autel Maxiflash VCI

and more.

 

 

Download Link

File including:

PIWIS3-PT VMware torrent

 

 

PassThru settings files included for:
VAS5054ASM2Pro
Openport 2.0
GoDiag GD101 J2534

VXDIAG ODIS6154 for piwis

VXDIAG VAS6154 (vas6154 clone) for piwis

VAS 6154 for piwis

AbritesAVDI for piwis

Maxiflash VCI for piwis

 

How to configure or set up PIWIS3 VMware with J2534 Passthru?

 

Just load this on VMware Workstation Pro and launch Piwis3.  Connect your VAS 6154 (or other VCI) and you should see the usb connection on bottom left of the screen.

To verify connection with VAS6154:

1. Navigate to D:\PiwisApps\VCI\Actia_64\XS_D_PDU_API_64 and run ACTIA_D-PDU_API_Tester.exe
2. Module Name and Resource drop downs should be populated if VAS6154 is detected.
3. Hit Start to run all tests — All tests should succeed.

*Latest clone vas6154 FW works on PT3G well. 1.6.6 can be updated to latest firmware (1.8.9) but needs to patch or buy VAG license from Allscanner (or buy vcx se 6154 with vag license in default).

(You need to install VAS drivers according to firmware)

 

Tips for users:

1. When you start it for the first time, we advise you to delete all unnecessary applications from lenovo and other unnecessary programs (video driver, Fi-Wi utilities). Otherwise VMware slows down very much, it is impossible to work.
On the good, the vmware image needs to be redone and downloaded without unnecessary programs.

2. You have to install VMware Tools and Adjust Windows scaling to 100% for proper display.

 

3. You can update interface firmware of 6154 clone to 1.66 with no problem but should not (!) upgrade software otherwise LIC for interface will be gone. If you are working with Vmware Workstation. Go ahead and install VMware tools in order to smoothen applications. Before you begin to modify VM take a snapshot that you can revert to, when You messed up your app.
You probably won’t need keylogger … rvlk.exe. It can be found in Sys32 folder… stop running it before delete.

 

4.

Make sure to have your interface connected to your VM.
Step 1 : check in VM -> Removable devices -> disconnect from Host
Step 2 : Countercheck in Devicemanager if “new device” is connected
Step 3 : “Navigate to D:\PiwisApps\VCI\Actia_64\XS_D_PDU_API_64 and run ACTIA_D-PDU_API_Tester.exe
Module Name and Resource drop downs should be populated if VAS6154 is detected.
Hit Start to run all tests — All tests should succeed.”

Explorer won’t show Volume D:\ …… in order to see all existing volumes use CMD -> diskpart -> ” List volume” …. also helpful to find location of VMware Tools update.

 

5. In case Piwis Application surface is shown incomplete on your screen and is unusable it is a must (!) to have Vmware client running on a host environment with native hardware granting VGA resolution of 1920×1068.
This is the only way to get a working solution. Be sure to check your client’s resolution and set it accordingly.

 

6.  If cannot see VCI interface with firmware 1.6.6. double click the vas6154 driver shortcut and you’ll see.

 

7.  For those with PIWIS imprint/registration issues:
– PIWIS is already imprinted to the VM. You should NOT need to imprint or register.
– The first time opening the VM, ALWAYS pick “I moved it” (even if you actually copied it). If you do not pick “I moved it” then PIWIS loses imprint and does not work.

 

8.

* For those with clone vas 6154 issues:
– Your 6154 device MUST have firmware 1.6.0 or 1.6.6. Newer firmwares will NOT work. If you have a newer firmware then the only reliable fix is to buy a replacement 6154 that has 1.6.6 (and never update the firmware). If you have 1.6.0 device then you need to set the VM date to before 2020 and then PIWIS will work. 1.6.6 does not need to change the date.

– Do NOT touch anything inside the VXManager app (don’t even run the app unless you need to see which firmware version you have). Using VXManager app can break PIWIS 6154 support and then both PIWIS and ACTIA_D-PDU_API_Tester will not work with your device. If 6154 support becomes broken, then the only easy fix is to delete the entire VM and download again. VXManager may ask to update firmware — NEVER UPDATE THE FIRMWARE (see note above).

 

 

Feedback:
1)
Worked like a charm with VxDiag Passthru!

 

2)
I tested it with an Autel MaxiFlash VCI on an 911-2022 and it works very good!
Piwis does not show it as connected and ignition is not provided so you have to select the car manually.

It is important to delete all other VCI entries in the PassthruSupport.04.04 registry folder.

 

3).
I can confirm it now also works with VNCI 6154a. VM is great and functions perfectly.

 

4). All work with 6154 clone.

clone vas6154 with this vmware work without any problem! yesterday flashed ecu and tcu with pdx files.

Free Download Mitsubishi MUT-III J2534 Drivers

 Original Mitsubishi MUT-III car diagnostic software download free. It works with MUT-3 and j2534 devices. 

The MUT-III system allows full diagnostics OF all Mitsubishi vehicle electronic components, measurement of engine and transmission parameters, configuration and adaptation of vehicle electronic components, updating of vehicle firmware (firmware), etc.

 

Part I: Download Mitsubishi MUT-III Software 

Software version:

Mitsubishi MUT III PRE 21061-00 [2021.11] For cars only. Not for Fuso trucks.

Download LINK 1

Download LINK 2

Language: English, French, German, Russian, Spanish, Polish, Chinese.

Operating system: Win 7, Win 10, Win 11

Compatible devices: VCI MUT-3 or special driver for J2534 devices (Openport 2.0, Scanmatick 2 pro, Autel Maxiflash etc)

 

As a rule these devices works well:

Bosch/Ford — VCM II
Bosch KTS 570
Drew MongoosePro MFC
JCI Alliance Probe
J2534 Mangoose (Mongoose JLR)
NISSAN VI2
Abritus 72 ABRITES AVDI
GM MDI
Allscanner VCX
VCX Nano N52FM (driver VXDIAG J2534)
NEXIQ USB-Link
Scanmatik 2 pro (with J2534 drivers)

Openport 2.0

Autel Maxiflash

etc

 

 

Part II: Download MUT-III J2534 Drivers

 

Software does not include special J2534 drivers.

It works with j2534 VCIs, just need to configure drivers.

Download MUT III J2534 Drivers

Credit to ParisCY.

If work openport or some passthru devices (MaxiFlash Elite, Maxiflash JVCI, MaxiFlash VCMI, MaxiVCI VCI200, V1Flash, SM2 Pro, Openport 2.0 (mini vci is not recommended)), install drivers, software will not see hardware, need to configure drivers.

You need to use only MUT-III SE and in CAN BUS cars only.
You need to install your J2534 drivers.
Then you need to use a patch/configurator/emulator (link above).
Need to install and configure special drivers manager.

How to configure J2534 drivers for MUT-III?

1. Install your drivers
2. Copy and paste the 2 files at C:/MUTSW_SE/MUT3_SE/System/Common
3. Open MUT-3 SE, start diagnosis and choose your adapter from your list.

 

Will Allscanner vxdiag work as J2534 for MUT III??
Depending on which model, there are models that only supports the Doip protocol. You can enter your device model on the Internet and read the information.

You need to copy the driver folder of vxdiag, open regedit navigate to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04 and export the folder vxdiag to your desktop, add any name when ask you.

After remove the vxdiag software. Copy the drivers folder at the same location it was before. And click the reg file from the desktop that you save before.

This way you will have your vxdiag drivers installed without the vxdiag software to control your lisense. vxdiag (for example vcx nano toyota) will work, nothing will change there, and try again with mut-3. if dll files from driver are not locked too it will work.

edit: the drivers folder you need to copy before remove vxdiag soft is here: C:\ProgramData\VCX\Apps\PASSTHRU\

open the folder in programdata\vcx\app\and check if you have toyota folder and save it to desktop, remove vxdiag. and download the ready drivers and reg above.

Run the reg file and try mut-3.

 

Disclaimer: Free to test by your side.  You are at your risk. 

www.obdii365.com

Autel J2534 vs Cardag vs VXDIAG vs Scanmatik vs Other J2534

 Now j2534 devices are more plentiful, Drewtech Cardaq Plus3, VXDIAG VCX SE, Openport 2, Scanmatik Pro2/PCMTuner, Autel MaxiFlash VCI, Godiag J2534, GM MDI, Mongoose Pro etc.

 

How to choose amgone these VCIs?

We simply divide them into two categories.

1. Supports J2534 only

2. Supports J2534 can also emulate OEM VCIs

 

 

 

1. Supports J2534 only

Device including: Cardaq Plus3, Openport 2, Scanmatik Pro2/PCMTuner, Autel MaxiFlash VCI, Godiag J2534 etc

They are pretty much the same, only that newer j2534 device covers more protocols like j2534-1 and j2534-2. The Cardaq supports passthru-2 and DOIP and it’s approved by all OEMs。

 

CarDAQ-Plus

1). CarDAQ-Plus 3 protocols
• SAE J2534-1
• SAE J2534-2

• J2534 v05.00 API

•DoIP

•CAN FD

• 4 CAN Channels

 

Compatible J2534 OEM Diagnostics:
• BMW/Mini – ISTA
• FCA – Wi-Tech 2.0 (2010-present)
• Ford – Ford Diagnostic and Repair System (FDRS)
• GM – Global Diagnostic System (GDS2)
• GM – Tech2Win (PC-based Tech2 software)
• Honda – Honda Diagnostic System (i-HDS)
• Jaguar/LandRover – Integrated Diagnostic Software (IDS) & Symptom-Driven Diagnostics (SDD)
• Mercedez-Benz – Pass Thru Programming System
• Mistubishi – Multi-Use Tester III Special Edition (MUT3–SE)
• Nissan – Consult III Plus R2R
• Subaru – Subaru Select Monitor 4 (SSM4)
• Toyota – TechStream
• VW/Audi (VAG) – Offboard Diagnostic Information System (ODIS)
• Volvo – Volvo Information and Diagnostics for Aftersales (VIDA)

• Chrysler wiTECH 2.0 J2534 Application (2009-older) (TechAuthority subscription required)

 

 

2). MaxiFlash VCI J2534:

1st generation:  Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 device, which performs standard PassThru J2534 functionality. 1st generation VCI does not have CAN FD and DoIP protocols. 

2nd generation:  The MS9** Ultra series MaxiFlash VCI/JVCI+ supports CAN FD, 4 CAN Channels, D-PDU, IS 022900-1 (j2534-1) and ISO 22900-2 (j2534-2) protocols and is RP1210 compliant. The MaxiFlash VCI can be use with Windows computer with applicable OE subscription for vehicle module programming

 

Autel J2534 is compatible with following OEM software

 

See also: Download and Install Autel IM608 JVCI J2534 Driver for OEM Software

 

Openport 2.0: 

only supports CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line) protocols. (See: openport passthru pros and cons)

What OEM J2534 software does the Openport 2.0 work with?

Company	J2534 Program	Status	Notes
Audi	erWin	Not Tested
BMW	ISTA	Minimal Testing
Chrysler	wiTech	Not Tested
Ford	http://www.motorcraftservice.com	Not Yet	J1850 support pending
General Motors	Tis2Web	Minimal Testing	CAN vehicles only
Honda	Honda Pass Thru	Works
Jaguar	http://www.jaguartechinfo.com	Not Tested
Mazda	Mazda J2534	Works
Mercedes Benz	J2534 Pass Thru Software	Not Tested	$925.00!
Mitsubishi	MMC Update Manager	Works
Nissan	Nissan J2534
Porsche	Pass Thru DME	Not Tested
Saturn	Tis2Web	Not Tested
Saab	Tis2Web	Not Tested
Subaru	STIS Pass Thru Programming Too	Works
Toyota	TIS Techstream	Works
Volkswagen	erWin	Not Tested

 

 

Scanmatik Pro2/PCMTuner

It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

Protocols:

• ISO-9141 / ISO-14230 (K-LINE)
• J1850VPW
• J1850PWM
• CAN
• Single Wire CAN.

No CAN FD, DoIP, 4 channels protocols. 

 

The J2534-RP1210 driver for the SM2 adapter (SM2-PRO) makes it possible to work with a large number of third-party programs that support operation via the J2534 interface.

List of tested programs:

• Allison DOC
• CAT Caterpillar Electronic Technician (CAT ET)
• Chiploader
• Chrysler Flash Application
• Combiloader
• Cummins Calterm
• Cummins Insite
• Detroit DDDL
• Eaton Service Ranger
• ECU Flasher (auto-bk)
• Ford Module Programming Tool
• Forscan
• GM GDS-2/SPS
• Hino Diagnostic Explorer
• Honda HDS
• Jaguar/Land Rover SDD
• JCB Service Master 4
• MDFLASHER
• MMC Flasher (Bruce-Willis)
• Nissan Csult 3+
• Noregon JPRO
• ODIS
• OpenBox
• PCMFlash
• Toyota Techstream
• Renault CAN Clip
• Volvo Premium Tech Tool PTT
• Volvo Vida
• Wabco Toolbox
• Xentry PassThru.

 

Godiag J2534

Supported Protocols

1. ISO15765 (Standard/Extended frame).
2. ISO9141.
3. ISO14230.
4. J1850 PWM (Support IFR and 2X speed mode).
5. J1850 VPW (Support 4X speed mode).

 

Compatible software:

Software	Brand	Year	NOTE
Toyota TIS Techstream	Toyota, Lexus	1995-2022	Free download and activate software, update by link
Honda HDS 3.102	Honda Acura	1995-2022	Does not support non-#7 K-line, update by link
ODIS-S, ODIS -E	VW Audi Skoda Seat	1995-2022	For J2534 VAG only. Don’t support CAN FD protocol, Don’t support Ignition switch voltage detection
Forscan 2.3.48	Ford Mazda Lincoln	1996-2022	Cannot do 3, 11 medium speed CAN
Scanmaster V2.0		1996-2022	Free download and activate software
PCMFlash V1.2.0	67 modules	1996-2022	Yes, test by your side
J1979Tester		1996-2022	Free Honda immo code calculation
ELMConfig		1996-2022	Yes, test by your side
Volvo VI-DA	Volvo	1996-2022	Yes, test by your side
JLR SDD2	Jaguar Land rover	2006-2016	Yes, test by your side
GDS2	GM Buick Cadilac Chevlert	1995-2022	Yes, test by your side
Xentry Passthru	Benz, Smart	1995-2022	Yes, test by your side
ISTA-D, ISTA-P	BMW, Mini	1995-2022	Yes, test by your side
Consult III-R2R	Nissan, Infiniti	1995-2022	Yes, test by your side

Godiag j2534 just compatible with software cracks without online programming capacities.

 

 

Mongoose Pro

Protocols

• • CAN Bus (capable of ISO 15765, GMLAN, and ISO14229)
  • ISO9141/KWP2000
  • J2534 and J2534-1

Mongoose is engineered to work with one of the following OEM’s J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.

 

 

 

2. Support J2534 also emulates OEM VCIs

Device including: VXDIAG VCX SE/Multi Tool, GM MDI (only GM OEM VCI), Super ICOM Pro N3 (emulate BMW OEM VCI only)

CarDag, Autel VCI and some other J2534 don’t emulate original VCIs as VXDIAG does. VXDIAG emulates OEM VCIs – also supports J2534 like cardaq.

For example, Cardag cannot work with Ford IDS, only FJDS -FDRS. VXDIAG works with all IDS, Forscan, FJDS, FDRS.

CarDag cannot be replaced for a VCX SE or C6 VCI used in XDOS either. CarDag only works with xentry passthru version. With the Passthru and XPT devices you cannot work a priori on K lines, therefore older vehicles that use them will not be covered. VXDIAG works with both XDOS and Xentry Passthru.

J2534 device can be used as a simple Passthru device, it is not a 1:1 replacement for OEM VCI.

 

 

VXDIAG VCI will emulate following software

Toyota Techstream

Honda HDS

Benz Xentry

BMW ISTA

Subaru SSM3/SSM4

JLR SDD Pathfinder

Porsche PIWIS II/PIWIS III

Ford/Mazda IDS

Renault Clip

Volvo VIDA

GM GDS2/Tech2win

VAG ODIS

 

Vxdiag also has software loaded to a laptop ready to go. We have a decent T440p with an i7 processor and 8GB ram, you could purchase an SSD and then upgrade the ram when you get it.

 

 

VXDIAG VCX SE/Multi VCI also can be used as J2534 passthru for Hyundai/Kia J2534, Techstream official, FDRS, FJDS, Techline Connect SPS2, pcmflash, bitbox, alexflasher, gromcalc and much more.

 

GM MDI/MDI2 can also emulate GM GDS2/Tech2win software. It can also be used as j2534 for multiple software. If you’re on a budget you can get a good quality GM MDI clone (there’s even a Bosch firmware that you can put on it)  and that works fine for most applications.

 

Super ICOM Pro N3+ is a new device to replace ICOM emulator. It will emulate ICOM ISTA VCI. It can also be used as J2534 and DoIP device for many applications.

See

How to Use Super ICOM Pro N3+ as J2534/DoIP Passthru?

 

 

FYI: here is a part of list of J2534 Programs – Cars Trucks and others

If you know more, you can share and we’ll add it to this list so that all people know.

Japan

• Toyota Techstream
• Nissan Consult III Plus
• Nissan Consult-III plus R2R
• Nissan NERS
• Mazda PCM Reflashing
• Honda HDS
• Mitsubishi MUT-III
• Suzuki SDT-II
• Subaru Select Monitor IV (SSM 4)

Europe + US

• BMW ISTA-D Rheingold
• VAG ODIS Service, Engineering
• VAG iDex
• Renault Can Clip
• Ford FJDS, FDRS, IDS
• GM GDS2
• GM Tech2Win
• GM SPS Programming Software
• Chrysler Flash Application/wiTech
• Jaguar Land Rover JLR SDD
• Mercedes Vediamo
• Mercedes DTS Monaco
• Porsche Piwis 2
• Xentry PassThru
• Volvo VIDA
• PSA DiagBox
• J2534 Hyundai/Kia

Trucks and others

• Allison DOC
• Cummins Calterm
• Cummins Insite
• Case New Holland Electronic Service Tools (CNH EST)
• ISUZU G-IDSS
• Hino Diagnostic eXplorer DX2
• MAN Cats II
• Volvo Premium Tech Tool PTT
• Wabco Diagnostic Software (Toolbox)