How to get witech Micropod2 clone at the best price?

This is your way to get the best-quality wiTech Micropod 2 clone at a very decent price.

First, Micropod 2 clone quality: confirmed!

Micropod 2 china clone is able to

Work as well as the original from the dealer:

http://blog.obdii365.com/2017/04/17/original-witech-micropod-ii-vs-hq-clone/

Work with wiTECH software on Windows 7 & 10:

http://blog.obdii365.com/2017/08/14/review-witech-micropod-2-win7-win10-works-fine/

Work with DRB III Emulator software:

http://blog.obdii365.com/2017/12/02/set-up-witech-micropod-2-with-drb-emulation/

Program new keys to Chrysler when all keys are lost:

http://blog.obdii365.com/2018/08/13/2015-chrysler-200-fobik-all-keys-lost-done-by-micropod-2/

Second, Micropod 2 reliable source: obdii365.com

Obdii365.com has been working for auto diagnostic and programming tools for sale for more than 7 years.

The team has real professionals good at dealing with issues with products such as registration, activation and also how-to-use.

Definitely, Amazon or Ebay should be your way to go for purchase online in your daily life. But as for items (esp. electronics) need professional tech support, obdii365.com must be the best solution. Items there comes with expertise, trustworthy and relief.

Here are Micropod 2 china cloned units with diagnostic and programming features confirmed.

It’s sourced from http://www.obdii365.com/wholesale/witech-micropod-2-diagnosis-programming-for-chrysler.html

Note that there are various factories in China making Micropod 2 but not all for good. You’d better check it’s SP27-C1 and has the board displayed as images uploaded here…

Now, it’s the MOST IMPORTANT!!!

How to get the Micropod 2 at a better price?

Here you go….

Please add Micropod 2 to the shopping cart

Then, use the coupon code: wiTech and applied to make a purchase

The price will drop, from $209 to $194.37. (7% off, around $15 saved)

The unit will be arrived to your end: FREE SHIPPING via DHL for 3-5 days!

Attach images of how to buy Micropod and save a lot….

Enjoy!

http://blog.obdii365.com/2018/09/13/where-to-get-the-cheapest-but-hq-witech-micropod2-clone/

Micropod 2 programs Fobik to Chrysler 200 when ALL KEYS LOST

Confirmed! wiTech Micropod 2 clone is able to do online programming to Chrysler including ECU programming and key adding even when all keys are lost. Here you go.

Purpose: Micropod 2 clone programs new key fobik to Chrysler 200 when all keys are lost

Car: 2015 Chrysler 200 (The 2015 Chrysler 200, along with other Fiat-based models like the Jeep Renegade, Jeep Cherokee, and Ram Promaster, are all equipped with a rolling PIN Code.)

What you need:

Locksmith Identification Number (LSID through NASTF)

Proper keys to be programmed

PIN Code

Laptop

MicroPOD II good quality clone or the genuine

wiTECH diagnostic application

Before you begin the programming process, you should the Key Code (key cut code) and Authorized PIN (key programming).

VERY VERY VERY IMPORTANT:

• You must be online to program the key with Micropod 2 clone.
• You can pull the PIN Code with OBDSTAR F104 key tool.
• If you input the wrong code for 3 times, it locks the BCM and you cannot service the vehicle for 24 hours.
• The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
• The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.

How to program fobik with wiTECH app:

Step 1:

Plug the MicroPOD II adapter into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.

Step 2:

Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

Step 3:

Next select “Miscellaneous Functions,” then “Program Ignition Fobiks.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

Step 4:

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIK within 30 seconds (the FOBIK needs to be located near the center console during this procedure).

Step 5:

Programming of the Ignition FOBIK is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key with wiTech application.

www.obdii365.com

http://www.obdii365.com/service/witech-micropod2-program-2005-chrysler-200-all-keys-lost-103131.html

DRB III Emulator Download, Install, Review, Car List

Free download DRB III Emulator on Mega:

https://mega.nz/#!1NsDSKYa!L0ZsC5PttRsmYAQhzZR-yK4YQKXAIgwV6ZxwaFEj0t4

DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III Emulator software application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to enable all the functions of the original Chrysler DRB III Scan Tool and more. This software package even comes with non-powertrain ECU programming files to enable reflashing everything from BCMs to sliding door modules.

IMPORTANT: You can get DRBIII Emulator, DRBIII Enhanced Emulator setup and U-Scan Chrysler.

But no one holds responsibility of any risk you’ll take when using free DRBIII emulator software.

For security, you’re advised to the tested version sw with your Micropod 2 clone:

http://www.obdii365.com/wholesale/witech-micropod-2-diagnosis-programming-for-chrysler.html

DRBIII Emulator Install:

For using DRBIII Emulator software with tools like VCI pod or Micropod II with witech version 14.xx.xx – 17.xx.xx, it depends on your device (clone or orig / old or newer release) and ONLY AFTER that, install DRBIII Emulator.

Watch screenshot.

Here is a step-by-step tutorial of DRBIII emulator on Micropod 2 clone:

http://blog.obdii365.com/2018/06/16/install-drbiii-emulator-for-micropod-2-on-windows-7/

DRB III Emulator Review: works on Micropod 2

I managed to make the Enhanced DRB III Emulator work with a micropod 2 clone on V17.04.27 Witech with Windows 7 32 bits all offline mode and no subscription.

First install Witech then install the DRB emulator and then the enhanced one.

find it here : C:\ProgramData\wiTECH\jserver\data\core\stubs

Or use the files provided in first post

Afterwards plug usb in pod then pod in the car turn ignition to on position and at last in the laptop

Open web browser, i used firefox and in the address bar put this and press enter : http://localhost:9876/launchExternalApp?appName=drb_iii_enhanced_emulator&locale=eng_ENG&deviceIp=172.22.22.22

It will launch the enhanced emulator.

DRB 3 Emulator Car List:

DRB 3 supports Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007 with protocols incl.

SAE J1850 PWM (FORD)

SAE J1850 VPW

SAE J2610 SCI (CHRYSLER)

ISO 15765 (Network Transport Protocol)

ISO 11898 (High Speed CAN)

ISO 14230 (Keyword2000)

ISO 9141/9141-2 (K-Line)

Chrysler Collision Detection Bus (CCD)

www.obdii365.com

http://blog.obdii365.com/2018/06/26/drb-iii-emulator-download-free-for-micropod-2-clone/

Why you should have Micropod 2 clone SP271-C1?

This is for those who are looking for a decent wiTech Micropod 2 China clone.

Look here:  http://www.obdii365.com/wholesale/witech-micropod-2-diagnosis-programming-for-chrysler.html

It’s the best quality of Micropod 2 clone SP271-C1, quality as good as VCM2 clone SP177-C1.

BUT, WHY IT IS THE BEST QUALITY MICROPOD 2 FROM CHINA?

First, this Micropod 2 SP271-C1 can be connected to the NETWORK and NEVER LOCKED!

You could use the clone for ONLINE DIAGNOSIS for NEW CHRYSLER CARS.

If you have an account, you also are able to do ONLINE PROGRAMMING.

Second, the wiTech Micropod2 SP271-C1 is confirmed to WORK NO ISSUES WITH DRBIII EMULATOR as well as the original Micropod 2.

This is a test report from our customer @rcompart and it’s verified to get DRBIII with the clone Micropod 2. And, it’s kind of him share the tutorial in detail with you guys.

All can be found here:

http://blog.obdii365.com/2018/06/16/install-drbiii-emulator-for-micropod-2-on-windows-7/

With DRBIII emulator, you can have your Micropod 2 for old Chysler the year 1997 – 2004 (2005)

Without DRBIII, Micropod 2 clone only works for Chrysler made after the year 2003

That is, you have a way for old Chrysler with a cloned Micropod 2 unit.

Third, wiTech software is confirmed also no issues with this Micropod2.

It’s tested 100% by real professionals working for obdii365.com

Note: what is DRB3 and what’s wiTech? What’s the main difference The DRB3 emulator is part of Chrysler’s Witech software. The Witech software supports two different pass-through devices, The VCI pod which is sold with the Witech system and the Chrysler Starmobile. The DRB3 emulator is a convenience item for dealerships to allow the use of their current witech scan-tool on older non CAN bus vehicles. It is not by any means a cost saving option.

The last, PCB talks a lot

Review on Chrysler wiTech Micropod 2 Diagnostic system

That’s all. Hope it’s helpful to you all.

Witech Micropod2 Clone Registration Error Solution

Here's the working solution to wiTech Micropod 2 clone Chrysler diagnostic tool registration problem.


Error:
"Registration is needed
Device with serial number*** is not registered. Please check the knowledge
base to determine how to register a device"

Obdii365.com engineer solution:

Right click wiTech Diagnostic Application-> Properties->Open file location

C:/Program Files (x86)/DCC Tools/wiTECH/client

Open app-config text file

Change the first number to any value marked red above. 

i.e change 6 to other numbers, 1-9

Then save the text file. (Very important!!!)

Run Witech Micropod II software again
If witech still prompts  error " an internal registration error has occurred ", just ignore by clicking no icon to close it.

Problem solved.

Then tick “Offline” on the bottom left corner (Don’t need to login)

Run diagnostic software.

Video guide:

How to solve Witech Micropod 2 registration error

www.obdii365.com

How to solve wiTECH MicroPod2 unable to connect error

Here are the connection error and solution of wiTECH MicroPod 2 for Chrysler: “wiTECH Application was unable to connect to the device at IP Address xxx.xxx.xxx.xxx”

Error message:

When users select a device in the Connection Wizard they may see the error message, “wiTECH Application was unable to connect to the device at IP Address xxx.xxx.xxx.xxx…” as shown in the screenshot below:

Possible reasons:

• wiTECH Diagnostic Application was installed and used by a user with “administrative” privileges on the PC and subsequently a user account with standard/restricted privileges attempts to use the application. The standard user does not have access to a file named “device” under C:\ProgramData\wiTECH\WDE (On Windows 7/Windows 8) folder.

• IP address conflicts/ network issue.

• The VCI device may have entered to a state where in it could not recover from an error condition.

Resolution:

When you see this error, please follow the steps listed below to fix the issue:

– Close wiTECH Diagnostic Application.

– Quit the wiTECH Server from the Windows System Tray as shown in the screenshot below:

– Login to the PC/Laptop with a user account that has administrative privileges.

– Locate the following directory on the PC/Laptop:

C:\ProgramData\wiTECH\WDE (On Windows 7/Windows 8)

– Right click on the “device” file and select “Properties” as shown below:

– Select “Security” tab in the “device” file “Properties” window and select “Users” from the “Group or user names” section as depicted in the screenshot below:

If you do not see “Users” in the list of Groups, click on “Edit” button and click on “Add” button as shown below. Enter “Users” in the “Enter Object names to select” section and click on “Check Names” button and “OK” button to get the “Users” group added to the list of user groups.

– Check the checkbox “Allow” for “Full control”. This will give full permission to all the Users of “device” file.

– Click on “Apply” button and then click on “OK” button on the “Permissions” window and “device” file “Properties” window.

– Login to the PC/Laptop with the Standard User account. Start wiTECH Server as shown below:

– Launch wiTECH Diagnostic Application -> Select the VCI device and see if the application successfully connects to the VCI device.

– If the above steps do not resolve the issue, contact your network administrator to make sure that there are no IP address conflicts involving the wiTECH Network IP range.

http://www.obdii365.com/service/witech-micropod-2-unable-to-connect-device-solution-99070.html

wiTech MicroPod2 "wiTech 1.0 Sundown " Error Solution

I had error when install witech Chrysler diagnostic tool for Micropod 2 interface.

Error:

"Attention: wiTECH 1.0 Sundown

As previously communicated, wiTech 1.0 will no longer diagnose vehicles that are fully supported in wiTECH 2.0 beginning in July.

Please upgrade your micropod to wiTECH 2.0 so that you will not see any lapse in vehicle coverage.
For information on how to upgrade your micropod to wiTECH 2.0, visit webpage at..."

Solution:
The error is caused by wrong software version. You have installed witech V17.03.10, this old version is not compatible with Micropod. You should install correct witech Micropod 2 V17.04.27 version in software CD. 

Original vs. HQ Clone Chrysler wiTech MicroPod II

Here’s a comparison chart of genuine vs. clone witech micropod 2 system, incl. High-quality witech micropod system vs. bad micropod 2 china clone.

Genuine WiTech Micropod2 vs. Clone wiTech Micropod II

witech micropod2 for sale:

http://www.obdii365.com/wholesale/witech-micropod-2-diagnostic-programming-tool.html

– the copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly.

– With high-quality USB cable which transfer data stably and reliably

– The package is anti-static, moisture-proof, anti-electromagnetic interference

– Workable with your current wiTECH software

– No smart cables required

– No drivers needed

micropod 2 ebay?

Ebay should be a good place to buy items. But for professional vehicle diagnostic tools, a site with experienced experts and technical support teams like http://www.obdii365.com/

witech micropod 2 price:

Original micropod 2: $4599 around

Clone micropod 2: $179 – $525, depends on quality

Note: MicroPod 2 (Item. No SP271-B) is the best quality one among china clones, same as the original.

witech micropod II HQ Clone Customer Review:Just ordered a chinese clone MicroPod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from Chrysler). For now it works fine.

I have tested Dodge also. I just used it on a 2014 dodge avenger just fine. I am able to flash a module update and program a new key with the unit.

I don’t have experience with Windows XP. This version of Witech works fine on Windows 7 and Windows 10.

I have also uploaded pictures of the internals for those who are curious.

witech software download:

http://blog.obdii365.com/2017/03/06/free-download-v17-03-01-witech-micropod-2-for-chrysler/

 http://blog.obdii365.com/2017/04/17/original-witech-micropod-ii-vs-hq-clone/

How to tell different Chrysler wiTech MicroPod 2 diagnostic tools?

The latest wiTech MicroPod 2 Chrysler diagnostic and programming software goes to V17.03.01.Obdii365.com here provides you free download resources.

Free download Chrysler wiTech MicroPod 2  V17.03.01 software

Password: 5uka

Compatible interface:

wiTech MicroPod 2 Diagnostic Programming Tool V17.03.01 for Chrysler Multi-language (Item# SP271-B ONLY)

Safe to use? Work ok?

Definitely yes. The wiTech MicroPod 2 software above has been tested no issues by professionals at obdii365.com. It can works perfectly.

Work OK with all the wiTech 2 clone?

No! Clone wiTech 2 mainly includes three versions: Sp271, Sp271-B, sp271-c. Software above only can be used with wiTech 2 diagnostic tools with the item no. Sp271-B. Software cannot work with Micropod2 SP271 or SP271-C.

What’s are the differences among wiTech MicroPod SP271, SP271-B and SP271-C?
1. They are made from different factories, quality differs.

2. MicroPod 2 SP271-B is the best quality one among these three. Function the same as original wiTech.  

3. SP271-C. Must connect to network to work, otherwise will prompt you to activate software. It is the cheapest.

AGAIN, wiTech 2 SOFTWARE LINK ONLY WORKS WITH Sp271-B!!!

PLEASE CHECK YOUR wiTech 2 BEFORE SOFTWARE DOWNLOAD.

Only English?

No,the witech software used in optional languages, incl. English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese.

What systems can be installed run on?

Windows XP is the only O.S. tested by professionals at obdii365.com.

How to setup wiTech MicroPod software on PC?

You can refer to the post:

http://blog.obdii365.com/2017/02/20/set-up-witech-micropod-2-chrysler-diagnostic-tool/

What can you do with wiTech 2?

The wiTECH diagnostic system is designed to do obdii diagnosis and ecu programming onChrysler, Dodge, Jeep, and North American Fiat vehicles equipped with CAN BUS technology ( 100 percent CAN coverage for Chrysler, Dodge, Jeep, and Fiat (North America), including  latest 2014 Dodge Ram ProMaster, 2015 Jeep Renegade). It provides the latest technology and significant hardware and software provides cutting edge technology will enable technicians to increase enhancements over the current StarSCAN and StarMOBILE tools. This toe their productivity and provide world-class diagnostic services to your customers.  This tool is very easy to use .The MicroPod 2 is a great OEM dealer diagnostic tool that will give you full access to the vehicles that you are working on.

How do uses think of wiTech 2?

wiTech MicroPod II review… Here you go.

http://blog.obdii365.com/2017/02/20/review-on-chrysler-witech-micropod-2-diagnostic-system/