MSD85 MSD87 MSV90 read ISN with AT200 Programmer!

AT200 programmer is confirmed to work good with BMW MSD85 MSD87 MSV90 – able to read isn without any issue!

Purpose: To check if the AT200 programmer is working or not

source: http://www.obdii365.com/wholesale/bmw-at200-ecu-programmer.html

Function for the test: Read ISN

BMW DMEs for the test: MSD85 MSD87 MSV90

Steps:

Step 1: install and run AT-200 programming software

Step 2: connect the AT-200 with the DME and the laptop

Step 3: select the model

Step 4: read the wiring and check if the connection is correct or not

Step 5: CGDI AT-200 identifies the DME and then reads out the ISN

Step 6: AT-200 is verified to works good!

The test: (images)

AT200 and MSD85

AT200 and MSD87

AT200 and MSV90

Time to use: less than 2 minutes for each test

Note: each part covers the programmer and DME connection (wiring), the instructions…

in detail…

Part 1: AT200 reads ISN from MSD85

BMW F02 750i SIEMENS MSD85

Part 2: AT200 reads ISN from MSD87

BMW F02 760i SIEMENS MSD87

Part 3: AT200 reads ISN from MSV90

Model and ECU: BMW F02 730Li SIEMENS MSV90

Result: All success!

AT-200 ecu programmer can read out Siemens MSD85, MSD87 , MSV90 and other ecus N55, N20.