2022/12/08

KT200 Read PSA DCM6.2C via OBD

 Citroen and Peugeot Delphi DCM 6.2C is 100% working with KT200/Foxflash via OBD.

 

Test reports:

Peugeot Boxer 2.0Blue hdi
Delphi dcm 6.2C R/W ok
Mod file adblue off
Chk for Lsuite (free download Lsuite here)

KT200 Read PSA DCM6.2C via OBD 1

KT200 Read PSA DCM6.2C via OBD 2

KT200 Read PSA DCM6.2C via OBD 3

Citroen Relay 2.0hdi dcm6.2c via obd read, write, checksum manual. All good and fast

KT200 Read PSA DCM6.2C via OBD 4

KT200 Read PSA DCM6.2C via OBD 5

KT200 Read PSA DCM6.2C via OBD 6

KT200 Read PSA DCM6.2C via OBD 7

KT200 Read PSA DCM6.2C via OBD 8

 

Also tested on

Citroen Jumper BlueHdi DCM6.2C read/write OBD, checksum is automatic

Reading and writing dcm6.2c Peugeot Boxer DPF EGR off impeccable

 

 

FYI:

If PSA doesn’t start after write ECU, ID ecu ok, Sometimes you need to wait 15mins after write file.

Disconnect battery for 5mins reconnect, Close car with remote, wait, open car, place ignition on 15 mins, then try to start.

 

KT200 will also read/write DCM6.1A via OBD. 

No comments:

Post a Comment