How to Replace BMW NBT EVO HDD?

How to Replace BMW NBT EVO HDD.

Replace HDD ON NBT EVO FIRST!!!

1.You need activate SSH on NBT EVO.You can use Feature Tools for that job. (SYS_DEBUG) 
(You can also use UART MODE (usb uart) and no need then code)

2. Login With Putty Soft to SSH. DOWNLOAD>>> putty.exe [1.57 Mb] (Downloads: 27)

IP: 169.254.199.119 
User: root
Password: ts&SK412 

3. After logined to SSH put this commands one by one!

1. create_hdd.sh -c partition
2. create_hdd.sh -c format
3. create_hdd.sh -c mount
4. OnOffDSICommander appreset

P.S If after reboot unit restart then run command:
create_hdd.sh -c directories

4. NBT EVO will restart, now open esys and reflash NBT EVO!
You can flash your unit in full (BTLD, SWFL, CAFD, IBAD)
Or if your psdzdata is matching your head units actual software level, you can flash only IBADs.


After All finished, download maps  put to USB + FSC, and update map. 
Job DONE!

All maps: https://mega.nz/folder/Z650FIaQ#JmFa4J2h0JRJsqG7JvzRLw

www.obdii365.com