Problem:
One of the Flex users had a problem connecting Korhex adapter for unlocking ECU.
Software shows Connected.
But the RGB LED near the USB/power connector keeps flashing red continuously.
Solution:
The flashing red LED does not necessarily mean there is a fault.
The red flashing LED is normal: the Korhex stays red when it is idle (as when it arrives) and turns green only during a Connect that is at least partly successful.
It can simply mean that Korhex is connected but not currently engaged with a locked ECU.
It does not mean the tool is faulty.
The red light will flash until you open a protocol that needs Korhex. Once you open a protocol that needs Korhex, the light will become green and when it is actually glitching it’ll become blue.
That’s normal until you open the protocol for glitching and then it will change to green.
If a Connect fails, please attach the logs of that attempt from C:\FlexV2\defprofile\history and tell MMS team which ECU you were connecting.
They will check your records and analyse the issue.
No comments:
Post a Comment