Where to Find Autel MK906BT I/M readiness Menu?

 Question:
I have an Autel MK906BT model and I can’t find I/M readiness screen. There seems to be no icon for it. ??!!??

Found I/M readiness screen ..

for those who also don’t know,

Hit EOBD rather than selecting the make/model.

Then it will take you to the next screen and there it is.

Pogo Pin Pinout for VAG UDS AKL

 Here comes the UDS Dashboards pin locations and Pogo Pin pinouts for VAG UDS protocol all keys lost programming using Xhorse VVDI2, Autel IM608 etc.

The pogo pin is part of the SVG cable and you can find the right position on google.  You must connect the pogo pin to right position on the dashboard.   If you place the pogo pin in the right position you can get the valid data file. With this datafile you can unlock the dashboard at any time without a working key.

When the pin is connected, turn the power supply ON and press the OK button.

Applicable to: Dashboards VDO UDS or Micronas 2009—2012

VDO MICRONAS Dashboard

1. Pogo PIN Positioning- VDO NEC dashboard

2. Pogo PIN Positioning- VDO NEC dashboard

3. Pogo PIN Positioning- VDO NEC dashboard

4. Pogo PIN Positioning- VDO NEC dashboard

5. Pogo PIN Positioning- VDO NEC dashboard

6. Pogo PIN Positioning- VDO NEC dashboard

7. Pogo PIN Positioning- VDO NEC dashboard

8. Pogo PIN Positioning- Type 8 Skoda Fabia

9. Pogo PIN Positioning- VDO NEC dashboard 10

10. Pogo PIN Positioning- VDO NEC dashboard 12

11. Pogo PIN Positioning- VDO NEC dashboard 13

12. Pogo PIN Positioning- VDO UDS NEC point 7

 

www.obdii365.com

Yanhua ACDP Clone Mercedes VGS3 9GTronic TCU

 Question:

I want to clone the Mercedes TCM VGS3 9GT. Do you have tool?

Yes, Yanhua Mini ACDP and module 19 will clone Benz VGS NAG3 9GTronic gearbox TCU.

Here is the wiring diagram of VGS3.

Which Tool to Clone MED9.1 CAN BUS ECU?

 Problem:

Trying to clone Audi Bosch MED9.1 ECU. I’ve tried with Xhorse Multi Prog and OBDSTAR DC706. Both tools cannot access the ECU. Both tools say to only hook up K-line no CAN H & CAN L lines hooked up to the ecu. When I have it hooked up on the bench to my Autel ultra with CAN H and CAN L the ecu communicates I am able to clear and see codes and ecu info. Has anyone been able to read Med9.1 CAN BUS???

Solution:

If it’s USA model it won’t work. USA models use CAN BUS and rest of the world use k-line.

So if all your wiring up is power ground and one wire and this is USA model then that’s why it won’t work.

 

Multi prog, DC706 and FC200 etc works fine with MED9.1 K-line ECU.  PCMFlash module 77 also read MED9.1.

If CAN BUS, use Ktag, KT200 or Foxflash to clone in BDM mode.

 

 

 

User experience:

1).  I had to use kt200 with bdm solder method to clone this ecu.

2). I have succesfully cloned this ECU with just KTAG/KESS3 (BDM).

3). I used Foxflash in BDM mode, and it cloned it perfectly.

 

 

Hope it helps.

www.obdii365.com

Which JLR Scanner Work with Topix Cloud?

 Can anyone help me get topix cloud to work with VXDIAG VCX SE?

VXDIAG VCX SE is not compatible with Topix Cloud. 

 only aftermarket tool that works are the vnci jlr doip and tabscan.

 Best is to get DA DoIP VCI from Diagnostic-associates.com - official tool for Topix Cloud and reasonable pricing.