Tops to Bypass Renault Zoe 2022 Security Gateway

 Is there any chance to bypass the Renault Zoe facelift 2020 Security Gateway? A Renault electrical model. It looks identical to Trafic 3.

This 40pin Nissan cable from Lonsdor working fine for gateway bypass.

You must use the grey cable from the BCM.

The emergency coil NOT IN THE START BUTTON put the card front of the gear selector.

 

How to connect the BCM 40 Pin cable to BCM?

That cable is like an extension cord.
Pull out the grey cable from the BCM.
Put the grey cable into the BCM40 cable socket.
and put back the 40pin cable plug into the BCM now empty socket (where from you pulled out the grey cable).
The BCM obd plug into the car’s obd socket and you have an empty obd socket with 12V (from the obd port and the can lines from the BCM thru the extension cord)
No need to cut or pining damaging anything.
plain and simple.

Lonsdor K518 Pro, OBDSTAR X300 DP Plus/G3 and Autel IM508/IM608 will program a new card without PINCODE (Free pincode).

Autel is not really straightforward.  DO NOT leave the learning process before it’s finished because there will be no ignition at the end.

Always keep good battery and battery maintainer when doing these Renault new smart keys.

 

Nissan Qashqai X-Trail Rogue Black BCM Lists

 I got a friend who made a Nissan Qashqai 2017 smart key with obdstar x300 dp plus but after key programming the first key stop working and the second one don’t work either.

This happens on smart keys only. It’s a common issue on 2014-2018 Nissan Qashqai / X-Trail /Rogue.  All tools (OBDSTAR, Lonsdor, Autel, AVDI, Truecode, Smart pro, Zedfull etc) including dealer have this problem.

These BCMs are on the black list.

The issue is when you delete all keys at the start of the add key process the ECU’s with those part numbers go to sleep and basically don’t wake up again.

BCM Immo box on most behind the glove box. Check the code on front and proceed with caution. If any doubts, send it to the dealer.

If BCM is dead. New BCM & dealer tool needed.  Replace the BCM and make new keys.

If you can read ECU flash and eeprom. Send dumps to experts to extract SKC from them. Then learn SKC to blank BCM with other tools.

Or BCM from dealer and OEM diagnostic.

 

There are some BCM part numbers that key programmers (obdstar, smart pro) warn you not to progam keys to because it will brick the BCM.

Those are the well know BCM part numbers and affected software versions. 

Tips and Hints

Pay attention to BCM part numbers listed which can be damaged by PIN reading – it is risky attempting to program keys on these BCM variants! Part numbers affected are:

284B1-3ZP0A

284BV4CB0A

284B1-4CB1A

284BV4CB2A

284B1-4CB3A

284B1-4CB4A

284B1-4CB5A

284B1-4CE1A

 

Don’t touch these vehicels if vehicles messed up goes to dealer you have provably a $2000 pound bill. Not worth the risk.

Mechanical keys / flip are not affected by this , these are safe to do , this only affects the proximity keys, all region affected. And even the main dealer tool kills these as well, no tool can do an affected unit not even consult, this is why the dealers had a technical service bullitin warning them of this issue and the new parts required to sort the car. New engine ECU, new BCM, new steering lock is required.

If they find an affected BCM they must have to replace it before the key learning. If the car is already killed they will need engine ecu (because the dealer can not virgin used ecu) bcm, and 2 keys plus online coding with Nissan Consult.

 

Read also:

http://www.key-programmer.org/2020/08/07/obdstar-x300-dp-plus-kills-nissan-qashqai-2015-bcm/