OBDII365 Technical Blog-Obdii365.com: CGDI Prog

Showing posts with label CGDI Prog. Show all posts

2018/08/02

What is the best Mercedes key programmer (FBS4, BGA, NEC, etc.)?

What is the best FBS4, BGA, NEC, Moto key programming tool? CGDI-MB or VVDI MB TOOL or Diagspeed or AK500 or NEC PRO57?

Look here! This is for people who are looking for one good key tool to program all new and old keys to Mercedes-Benz.

Mercedes key programmers comparison: CGDI-MB vs VVDI MB vs Diagspeed vs AK500 vs NEC PRO57

Key Type	VVDI MB	CGDI MB	Diagspeed	AK500	NEC Pro 57
1997- 2000 705 Moto	YES	YES	YES	YES	NO
2001 - 2005 NEC	YES	YES	YES	YES	YES
2006 - 2010 NEC	YES	YES	YES	YES	YES
2011- BGA	YES	NO	YES	NO	NO
2015 - FBS4	NO	YES	NO	NO	NO

It’s easy to find that,

you’d better to have more than one key tool for Mercedes key programming.

IMPORTANT: CGDI-MB is the only FBS4 key programming tool!

So, you have to use a CGDI MB esp. for FBS4 key (confirmed to read and write FBS4 keys to W205, W218,W166… without any issue) and get another auto key programmer (such as VVDI-MB TOOL and the like) for BGA keys and the other.

Note that with Xhorse VVDI MB, you should buy VVDI PROG too, because the are some eis and ecu’s that you cant do with MB Tool independently. For example some w210 eis or Sprinter 906. You should have both, VVDI MB Tool and VVDI prog. Or, if you have to buy some tool again, Simon Touch is the best, but its more expensive.

But if you have a CGDI MB, you have a chance to program a new key through OBD. All done with a tool. That’s the reason why people look for it.

YOU HAVE TO KNOW: What is the difference between FBS3 and FBS4:

Late 2015 is FBS4, Early production 2015 is still FBS3.

Not on the outer shell.. maybe the numbers under the battery cover will tell you..

You can also tell by the kind of car…

For sure FBS4… 222, 231, 205, 117, 2012 model year and up 212 and 218, 166 and 190

Note that FBS4 was added to 212 207 etc at mid 2013 (804) not in MY 2012

FBS4 can use blank keys to program to the car with Xentry and an authorized online account.. Not all online accounts have access to program keys..

www.obdii365.com

http://www.obdii365.com/service/cgdi-mb-vs-vvdi-mb-vs-diagspeed-vs-ak500-vs-nec-pro57-102128.html

2018/06/15

CG Pro 9S12 Adds Porsche Key Programming

CG-Pro 9S12 freescale programmer newly updated Porsche key read& write function for FREE..

How to Program Porsche key with CG-Pro programmer?

Select Model-> IMMO Key Programming

Click on “Open folder” and load eeprom data
Insert a blank key into CG-Pro programmer coil, click on “Read key”
Choose key position, then click “Write Key”

Select from chip

2. NEC

D70F3548

D70F3558

D70F3585

D70F3385

D70F3469

D70F3628

3. Motorola -9S12

9S12HA32-0M34S

9S12HY32-0M34S

9S12HA48-0M34S

9S12HY48-0M34S

9S12HA64-0M34S

9S12HY64-0M34S

9S12XHY128-0M23Y

9S12XHY256-0M23Y

9S12HZ128-3L16Y

9S12HZ256-3L16Y

9S12XEP768-4M48H

4. Models->IMMO->Jaguar & Land rover

BCM-XEP768

BCM-XEP100

www.obdii365.com

http://blog.obdii365.com/2018/06/15/program-porsche-key-with-cg-pro-9s12-programmer/

2018/06/03

BMW FEM BDC Add key and All Keys Lost with CGDI BMW

Here’s the tutorial on BMW FEM/BDC key programming (add key & all keys lost) by using CGDI Prog BMW key programmer.

1.Read and Backup eeprom

2.Add a key (copy key with key)

3. Program all keys lost (copy key without key)

1.Read & Backup Data

Connect CGDI BMW with vehicle via OBD diagnostic socket

maintains voltage above 12v , do not turn off the computer screen during operation.

Open CGDI BMW software

Select “FEM/BDC key match” and click enter

Connect successfully, maintain enough voltage, click “yes”

Need to disassemble the module, read EEPROM data, FEM is 95128

FEM module installation location

Use CG100 Prog to read out 95128 IC data and save the data

Remove the 95128 chip, wash it, and clip it to the ATMEGA adapter

Open the CG-100 to read the data and save it

Go back to cgdi and load the data

Load successfully, save the new data generated by the system

Write back new data with cg-100, weld back to module, and click next

Waiting for programming

After programming, write back 95128 original data,
put FEM into the car again, and click next

Use CG100 to write back 95128 original data

When finished, click “next”

Set code successfully, customers can do any operation.

2. Add FEM/BDC key with CGDI BMW

Copy key with key

choose the unused key, and click “generate the dealer key”

Read working key,click Next

Read successfully and display information

Program the new key

The new key matched successfully.

3. CGDI BMW Program FEM/BDC All Keys Lost

Copy key without key

Using CG100 to read the engine data

Click to enter “ECU

Click on the engine model option to enter the current vehicle

According to the software physical wiring diagram wiring

Physical connection

Read successfully and save the data

Show ISN and VIN

Return to cg-di, select unused key bits, and click “generate dealer keys”

Click on the next item that you select and click next
(Manually input known ISN)

Check the information and click ok

Place new key

New key programming success.

www.obdii365.com

http://blog.obdii365.com/2018/06/03/bmw-fem-bdc-add-key-and-all-keys-lost-with-cgdi-bmw/

CGDI BMW FEM Body Coding and Programming Guide

CGDI Prog BMW is not only able to program keys, read ISN code, but also do ECU coding and programming. Here’s the factory guide to code/program F-series module, i.e FEM Body as an example.