Clone Peugeot VD56.1 ECU with Flex or AutoTuner

 Question:

1). Is it possible clone vd56.1 peugeot ECU with AutoTuner programmer?

2). Anybody cloned 1:1 a continenal vd56.1 ecu with Magic MotorSport Flex boot mode?

Here is the clue.

The VD56.1 ecu has OTP areas so although the data will copy the vehicle will not start. Sometimes engine starts, but gearbox have immo error.

Only option is immo off via emulator for used ecu, Julie emulator works well.

Clone 1:1 not possible. You can make immo off and clone config.

Both AutoTuner and Flex will read/write this ECU in boot mode and do immo off.  Both Flex and autotuner will do checksum correction when writing.

 

 

Magic Motorsport Flex

This ecu has to have boot unlock. Flex does it without problem. Need opening. We have done immo off on these.

Example:

CITROEN BERLINGO (K9) 1.2 PURETECH VALEO VD56.1.

Put automatic checksum out by institutions of flex. Tool can do checksum by himself. Slave&master tool can do this.

AutoTuner:

Did few VD56.1 ECU immo off with autotuner all work.

For example:

Continental VD56.1 Peugeot 308 1.2l Pure tech in Boot mode. Not ok with autotuner power, but ok with battery power. Perfectly.

Rewrite on it with no problems.
Buy yourself a 10 Ampere laboratory power supply to ensure voltage maintenance while having protection in case of connection error.

Alientech KESS3 also read/write VD56.1 in boot mode:

Will KESS3 Clone PSA VD46.1 and VD56.1 ECU?