On May 14th, Cummins released June 2020 Incal on their download site. For those still using Insite 7.6, here converted & uploaded all 5 disc’s into one download (CalibrationWorkspace) to Mega.nz.
INCAL is a DVD set that has a complete list of current ECM calibrations for INSITE. The folder is massive at 39.6gb and will expire on December 2nd 2020 as will the original download from Cummins.
06.2020 Cummins INCAL DVD Calibration Files Download FREE:
It has been tested on a ISC & ISB CM2150 engines using an Inline 6, it re-calibrated both ECMs without any problems.
– O.S.: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
– CPU: Pentium/Athlon 2 GHz or higher
– RAM: 512 MB of system memory
– Hard Drive: 10 GB of available space
– Optical Drive: DVD-ROM
To get the best diagnostic testing and full engine coverage, We would recommend using Insite 8.5.0 or later and using calibrations downloaded direct from Cummins.
The file is clean but some virus scanner will flag it.
Update to Cummins Insite 8.5.2 only enjoy!!!!
Source: MHH forum.
*** Please try the link at your own risk, the editor is not responsible for any error it may bring you.
How to Install Insite 8.5.2? 1. First unzip 8.5 and run “admininstall” as admin.’ Once Install go to Step 2.
2 Use “Cummins Update Manager and upgrade 8.5 to 8.5.2 ( that means do all update First to 8.5.1 then to 8.5.2)
How to activate Insite 8.5.2? This method use a sideloader just like 8.3 so will need run 8.5.2 in Simulation mode.
Put the Sideloader folder on your C: Drive
Next go into the folder and you will see “Cummins Insite 8.5.2” Create a destop shortcut to your desktop
Next go to Keygen folder and navigate to folder “EXE” inside that folder you wiil see WLGEN run it
Next double click on your shortcut desktop icon for the Insite 8.5.2 that you made you it will show HWID don’t worry you don’t need to write it down it will auto copy the hwid
Go back to the WLGEN tool and click on License Manager and then click ” Add License ” Put any Customer name you want next click Hardware ID and right click to paste the Hardware ID into the spot.
Make sure set a Date of Experiation or else the sideloder will not work
Next click save then to Create License Key Now go look into the folder that is just made and copy the registery.dat file
Place that file into the sideloader Folder on the C drive that has Cummins 8.5.2 sideloader
Now go back to your desktop and launch 8.5.2 shortcut > I will repeat if ask you click on the simulation
For the Folks don’t know to use the program
This work’s like 8.3 so the zapit and fleet counts are built into the side loader you don’t need no key’s Only way the zapit will work or show up is to be connected to the ECM. Once connected to a lock ecm it will show up after a few minutes…
Update on 03/31/2020: For those of you are having problem doing the updates of the folder, the solution is easy.
Run update manger as admin Then drop the box down to “browse” Then do the update folder in order First 8.5.1.82 Then 8.5.2
Free download Cummins INSITE 8.2 with installation and activation help to make it work with new and old inline 4/5/6/7 adapters. Here are two versions for you, one with free activation for 15-day trials only, the other with 500 times to use once activated.
Part 1: Insite 8.2 FREE version:
Here is the Cummins INSITE 8.2.X installer that tests all levels of functionality Members copy patch files to C/Intelect/INSITE/XMLData folder and shortcut to desktop Copy code gives me free activation 15 trials.
UNKNOWN SECURITY! You’re trying the free insite at your own risk!
Cummins INSITE 8.2+Full KG PRO top, fleet calibration and flash ecm feature list
1. Authorization file generator 2. Username generated authorization file 3. Is it bound to a computer (Cancel is not limited to computers) 4. Lock the CPU to lock the serial number of the hard disk 5. Bind the MAC Address to the BIOS Information 6. Check the limit and enter the appropriate value. Unchecked is no limit. 7. Valid expiration time 8. Limit once per minute 9. Limits can run for a total of minutes 10. Limit attempts to limit trial dates
Part 2: Insite 8.2 TESTED version:
Here is the 100% tested version. You can use the Insite 8.2 pro or lite version with security and relief. You have 500 times for use once your insite is activated.
Do not substitute cables, except as indicated in the INLINE 5, 6, or 7 Product Announcement Bulletin.
Incompatible cables may damage the INLINE 5, 6, or 7 adapter or personal computer and will void warranty.
Incompatible cables may cause communication issues with INSITE.
INLINE 5, 6, and 7 adapters may intermittently lose communication. If your Datalink adapter has communication problems, disconnect power from the adapter for 5 seconds and then reconnect. The INSITE program does not need to be shutdown.
There is a feature under Tools > Reset Datalink Adapter that may correct some software communication errors with the INLINE 5, 6, and 7.
The main harness (backbone) has a maximum overall length of 40 meters.
A J1939 stub, which can be a connection point for ECM’s and/or the INLINE 5, 6, and 7 Datalink adapter, cannot exceed a maximum length of 1 meter.
At each end of the backbone harness is a terminating resistor with a nominal resistance of 120 Ohms, it will measure 60 Ohms when you measure across the Datalink.
The INLINE 5, 6, and 7 adapters should be connected to a continuous battery power supply. When making adjustments with INSITE, including calibration download, the operator will be asked to switch the key off. If the adapter is getting its power from a power source dependent on the key switch status, such as the lighter adapter inside the cab, the adapter will lose power, which will result in INSITE losing connection to the ECM. This will require the operator to reconnect to the ECM and the adjustments might not have been saved.
Insite 8.2 protocols:
Engine Model Years 2007 and newer only support the J1939 protocol. Please refer to the following table for specific information:
Note: The INLINE 4 adapter is obsolete. It can be used with INSITE, but technical support for this adapter is no longer available.
INSITE 8.2.0 released notes:
1 Opening INSITE
Installation
Connections
Advanced ECM Data
5.Calibrations
Display Graphics
ECM Diagnostic Tests
Fault Codes
Printing
Simulators
INSITE Integrated Simulator – Single and Multi-Module
Work Orders/ECM Images/Templates
In detail…
1 Opening INSITE
INSITE 8.2.0 takes longer to open if the computer has been restarted. Issue is currently under investigation.
2 Installation
INSITE 8.2.0 does not support Windows® XP or Windows® Vista. INSITE version 8.2.0 will only operate on PC’s running either Windows® 7, Windows® 8 or Windows® 10.
Refer to the table below for the hard drive space required for the installation of
INSITE 8.2.0. This is based on the assumption that the Operating System is installed
on C:\
Hard Drive Space Requirements
– Upgrade from 8.1.3: 350MB
– Fresh Install: 500MB
NOTE: It is highly recommended that you always reboot your PC after installing software
3 Connections
Error Messages for communication failures:
Error 5200: Indicates communication loss between computer and the datalink adapter.
Error 5201: Indicates communication loss between the datalink adapter and the ECM.
Error 5202: Indicates no communication could be established between the datalink adapter and the computer.
Error 5204: Indicates no communication could be established between the datalink adapter and the ECM.
If the “Auto Configure” and/or “Datalink Adapter Connection Test” do not find the adapter when connected, manually configure the Datalink adapter connection.
An Internet connection is required before selecting the following URL’s from the Help > About INSITE menu: http://www.cummins.com or http://insite.cummins.com
4 Advanced ECM Data
If the display becomes distorted or cannot be completely viewed, close the Advanced ECM Data window and then reopen it. Resizing the window can cause the view to become distorted.
5 Calibrations
Automotive applications will have a default setting of “ON” for the Save and Restore option in the Calibration Download dialog.
Industrial applications will have a Default Setting of “OFF” for the Save and Restore option in the Calibration Download dialog.
When performing a Calibration Download, the “Save and Restore” option may be grayed out for some applications.
To decrease calibration download times, please insure that all applications other than INSITE are closed. Always use the J1939 protocol and engine connector when available.
Computers with less than the minimum recommended hardware requirements will have an extended Calibration Download time. Screen savers and suspend modes should be disabled
6 Display Graphics
The use of Large Toolbar Buttons will not display all icons on the toolbar. Work Around: Under Tools > Options > General, select Small Buttons in Display Options.
Dual Monitors are not supported by INSITE.
To disable the “Display Feature Names” option for the view bar, uncheck the box in Tools > Options > General > Viewbar > Display Feature Names.
If your PC monitor display is set to “Large Fonts”, some information in INSITE may not be displayed. It is recommended to use small fonts.
7 ECM Diagnostic Tests
If the display becomes distorted or cannot be completely viewed, close the ECM Diagnostic Tests window and then reopen it. Resizing the window can cause the view to become distorted.
8 Fault Codes
The MIL Lamp Status is not displayed when printing the Image Fault Codes in Tool Display Format.
Work Around: Print the Image Fault Codes in Text Only Format or connect to the image, open Fault Codes and select the Print icon.
9 Printing
When using print preview, use the tool bar magnifying glass to display the text in a larger view. The Print options will be disabled when no printers are available. This includes the Page Setup, Print and Print Preview options. Work around: Setup/install a printer on the PC and retry the INSITE print selection.
10 Simulators
Values shown in simulator do not reflect real values that would be seen when connected to an engine.
11 INSITE Integrated Simulator – Single and Multi-Module
All simulators for the 2007 models and above were combined into one single simulator called INSITE Integrated Simulator – Single Module and INSITE Integrated Simulator – Multi-Module. These will display all the Features and Parameters, ECM Diagnostic Tests, and Advanced ECM Data that is supported for single and multimodule engines.
12 Work Orders/ECM Images/Templates
Double clicking on the exported image files (.csv format) will not open them with the correct format in Microsoft Excel. Work around: Follow the steps below to open an exported (.csv format) image file in Excel:
Open the .csv image file with Microsoft Excel
Highlight column A
Click on Data > Text to Columns
In Step 1 of the wizard, make sure the “Delimited” option is selected and click “Next”
In step 2 of the wizard, uncheck the “Tab” box and check the “Comma” box and click “Next”
In step 3 of the wizard, click on “Finish”
Format columns as desired.
When upgrading to INSITE 8.2.0, the following file and folder need to be backed up:
C:\Intelect\INSITE\UserSettings\data.wo
C:\Intelect\INSITE\WorkOrders
Alternatively, select the “Export All” from the right-click menu while highlighting any Image.
When using templates, it is recommended to verify the first template sent to the target vehicle. This helps ensure the template configuration is correct for subsequent vehicles.
When using templates, verify that the ECM code is compatible or the same.
When naming images and templates, special characters cannot be used (i.e. & ^, etc.).
3 Copy the Instie crack program to Desk and double click open it
4 Copy hwid from activator to keygen with
5 Put any user name you want
6 generate key place key and name in activator
7 run activator as admin
8 start icon should open up
9 hit start insite logo should show
10 when the activate licence window opens up click simulator mode
11 make sure internet is on for first activation
12 other time activate licence window open click simulator it will still work correct no active licence ever show but it will work like dealer lisenced pro. Password to open main zip file MmhaUuto!$theSh!t Password to open second zip ThankYouGhostman!!
Insite 8.3 Question and Answers:
Q: Insite 8 installation was done perfectly without issue. But when trying to connect any ECU – Insite asks about license for connecting.
A: Don’t use original icon. Use loader and run as admin.
Q: This is version 8.3. error 50005
A: Uninstall everything including folder in c drive reinstall connect to internet the first timehit simulator and run as admin might even have to make exemption in antivirus. It works well but if you are running windows defender it can cause some communication issues I have found. For the best solution but not free solution contact zdssf
Q: I could install perfectly here, but I have a problem. When I do the download of calibration files they are found on the net, I click save but they do not save anywhere on the computer. Has anyone ever experienced this?
A: All the calibrations can be downloaded from: https://www.cummins.com/parts-and-servic…ools/incal Save them to the cal workspace folder and you have them all to rummage through as you need. I have always found this to be much easier.
Q: works with nexiq usblink interface?
A: Yes. I run it with genuine nexiq 2 or inline 6 data link adapters.
Q: How to obtain the registration name for the keygen
watch it a few times and that is all it does. this works good when you are done. when it launches insite use the the bottom button. once in simulator mode pick your data link.and connect. just like a licensed copy.
– mine is still working and it’s been almost 2 months
– been playing around with this. seems to work ok. flashed a truck with it today with no problems
– If people can follow directions for activation it will work fine for them you can upgrade the fis with 8.4 and have a pretty a solid program it was a good share. For many people here because 7.6 was going by way of the dinosaur. Now the members here have a way to work on the new stuff.
