Here we will show how to program Volvo XC-90 2024 CEM key with Yanhua Mini ACDP2 or ACDP1. Add key and all keys lost share the same procedure.
You will need:
Yanhua Mini ACDP2/ACDP1 host
Volvo 2023-2024 CEM interface board
New interface board supports Volvo Models: 2023-2024 Volvo S60/S90/XC60 and Lynk & Co.
CEM chip: SPC5748G, SPC5748C
Procedure:
Remove and disassemble the CEM module. Exactly the same spot as older models.
Select Volvo->XC90 (2022-)
Select Read CEM Data by ICP-> SPC5748G (Volvo -24)
Connect new Volvo CEM interface board with CEM module
Check here to install these interface boards step by step.
https://www.obdii365.com/service/install-yanhua-acdp-2023-2024-volvo-cem-interface-boards.html
Then read CEM data
Read CEM data successfully. ACDP2 will auto save CEM data.
Install CEM module back to vehicle.
Connect ACDP2 with the vehicle via standard OBDII adapter.
Go to Volvo XC-90 2022-, then select OBD Detect.
OBD detect VIN and current number of keys: 2.
Save key info.
Then choose Add key/All keys lost.
Make sure the CEM module has installed.
Connect the ACDP to vehicle OBDII port and press the engine Start button. Turn on ignition.
Select CEM data just saved.
Put the smart key to be programmed in the key recognition area of the cup holder.
The new key is programmed successfully.
Done.
http://blog.obdii365.com/2024/10/28/how-to-add-volvo-xc90-2024-cem-key-with-yanhua-mini-acdp2/
No comments:
Post a Comment