Will Scania VCI3 with Kvaser CANKing Software?

 Question:

If Scania VCI3 adapter will work with Kvaser CANKing software (Kvaser lib API)?

Kvaser is the producer of VCI3 and VCI2.  When you install SDP3 you install Kvaser drivers and libraries.

Some tested working.

The VCI 3 adapter works with King CAN software.

 

Bus 004 Device 017: ID 0bfd:0101 Kvaser AB Scania VCI3
I recompiled and installed Linux drivers.
A little bit about Full Chip Scania VCI3 :

Serial Number 7041
73-30130-00634-8
Firmware 3.21.486
BlackBird V2 <— reports
82C251 CAN Bus Transceiver
PCB 634-640 V 5.1

Original BlackBird V2 comes with TJA1051T which will support CAN FD protocol.

 

Log:

One of our customers used Scania VCI 3 with Kvaser CANking over WIFI.

 

There are many versions of VCI3 clones, the most expensive version- Full chip VCI3 is the best.

FYI
Scania OBD pinout. Its standard OBD II port: 4 pin Chassis ground, 5 pin Signal ground.

SVCI Ford IDS Unregistered software Error Solution

STIC has discontinued the SVCI-FVDI device and stopped updating it from the Ford-Mazda IDS V125 version.

But when you use Ford IDS V125 with Patch "SVCI J2534 for Ford". You will have "Unregistered software. Expired date 2019.7.12” Error.

Here is the solution to SVCI “Unregistered software. Expired date 2019.7.12” Error.

* Solution 1:
- Change date "2 or more" month ago from now. "SVCI J2534 for Ford" will work.

Note: I have tried it and Mazda IDS does not need change date.

* Solution 2:
- If you want use STIC - SVCI - FVDI with Ford IDS, Mazda IDS lastest version. Choose software from OBDII365.com We can support you solve this.

https://www.obdii365.com/wholesale/fvdi-j2534-diagnostic-interface.html

Free Download Toyolex 3 and Keygen

 ToyoLex 3 software, supports binary files of all 3 generations of Toyota and Lexus Denso Engine Control Units on the market, gasoline, diesel, and hybrid engines.

 

Here we share ToyoLex3 software for free.

Free resource. Free to test by your side. You are at your risk.

 

 

Free download Toyolex 3 with keygen

password: windforce1977

 

Disable anti-virus program before downloading.

 

How to use:

1 – open toyolexMek then close and open toyolex copy hardware id and name
2 – open keygen fill hardware id + name keep click ok untill you see the key and done

We do have Toyolex3 with Keygen safe resource with activation, $60 per PC locked.

If interested contact

WHATSAPP:+86 18150118226

Skype:OBDII365.com
Email:Sales@obdii365.com

 

 

Features:
– New algorithm that recognizes Generation 3 DTC tables structure embedded in Denso Generation 2 files.
– Added a new algorithm that allows DTC erase function on Hybrid engine vehicles.
– Adblue / SCR System disable function.
– DieselParticulate Filter [DPF] disable the function for all Denso Generations ECUs.
– Vehicle speed limiter [Vmax] correction function for 1GD-FTV, 2GD-FTV, 1KD-FTV, and 2KD-FTV Diesel engines.
– Catalyst System [CAT – Lambda sensor] disable the function for 1GD-FTV and 2GD-FTV diesel engines.
– Catalyst System [CAT – Lambda sensor] disable the function for all gasoline engines.
– Exhaust Gas Recirculation [EGR] disable function.
– Intake Manifold Valve [IMV] disable function.
– Intake Manifold Runner [IMR] disable function.
– Immobilizer disable function [IMMO OFF] on 1KD-FTV, 2KD-FTV, 1GD-FTV and 2GD-FTV with Denso GEN 2 ECUs.
ToyoLex 3 supports binary files from the following flashing tools:
– KTAG.
– New Trasdata.
– New Genius.
– Kess.
– BitBox.
– VF 2 Flasher.
– Flex by Magic MotorSport.
– ECUF Flasher by Alex.
– PCM Flasher.
– Toyota Lexus ECU Flasher‘

 

ToyoLex 3 FAQs

Q: What generations of Denso ECUs does ToyoLex 3 support?

A: ToyoLex 3 supports binary files of all 3 generations of Toyota and Lexus Denso Engine Control Units on the market, gasoline, diesel and hybrid engines.

 

Q: Which flash tools support files from?

A: ToyoLex 3 supports binary files from the following flashing tools:

– KTAG.

– New Trasdata.

– New Genius.

– Kess v2.

– BitBox.

– VF 2 Flasher.

– Flex by Magic MotorSport.

– ECUF Flasher by Alex.

– PCM Flasher.

– Toyota Lexus ECU Flasher.

 

Q: ToyoLex 3 works with a physical interface?

A: ToyoLex 3 is an application whose function is to automatically edit binary files from ECUs, therefore it does not require any interface.

 

Q: Does ToyoLex 3 support .CUW calibration files?

A: ToyoLex 3 supports only binary files (.bin). We offer a .cuw to .bin file conversion service if necessary.

 

Q: What is the price of a ToyoLex 3 license and what does it comprise?

A: The price of a ToyoLex 3 license(Paypal fee is included). License is valid for one PC and updates are free for 1 (one) year. License is enabled only by e-mail (Software-based license).

 

Q: Once the license is acquired, how long do I have the key to enable the application?

A: The key to activate the application will be available in your email account within 2 working days.

 

Q: What family of microcontrollers does ToyoLex 3 support?

A: ToyoLex 3 supports binary files from the following microcontrollers:

– Denso Generation 3: R7F701202 AND R7F701216 (4Mb Flash).

– Denso Generation 2: D76F0199GD (1.25Mb Flash), D76F0196F1 (1.5Mb Flash), D76F0219F1 (2.0Mb Flash).

– Denso Generation 1: NEC 76F00XX series (368 Kb, 512 Kb, 736 Kb, 768 Kb, 992 Kb, 1Mb Flash).

 

Q: Windows is compatible ToyoLex 3?

A: It run without any problems on W7 and W10.

What Tool to Program Jeep Compass MQB48 Chip Key?

 What tool to program Jeep Compass 2018 MQB48 chip key?

 

OBDSTAR: 

Obdstar cannot precode this transponder.

Jeep Compass 2018 like you see MqB48 chip, I ordered this mqb48 chip to do an add key on this car.

The car does not have SGW.
I enter in car not by compass but by renegade. Read flash ok with obdstar x300 dp plus.
Read pin ok.
Precode key failed.
I when precode it ask for the P001 but when I’m in obd the p001 doesn’t get enough power.
I remove the obd and plug it on power supplier 13v than I can enter in the procedure.
But like you see it failed.

Autel IM608: Yes

Autel walks these.

Solved.

Update.
I could do whole procedure with autel im608 without any problem. Precode dealer key see picture.

Smart Pro:

Smartpro can do Jeep Compass 2018 if it is start-stop smart key.

It does not work if it is a blade key. Doesn’t work if locked with a remote does it so need to remove and eeprom. Same as active alarm on fiat.

 

Top 3 Tools to Correct Mercedes W212 Mileage

 Which tool corrects Mercedes W212 mileage?

 

Yanhua Digimaster 3

For easier w212 (none facelift model) digimaster 3 can do directly via OBD, no CAN filter.

Late 2013- 2014 Mercedes W212 facelift models you need to correct odometer and install CAN Filter (EZS nothing). The can filter goes near the cluster.

It can be done with Yanhua Digimaster 3. By the way, take backup from eeprom first.

 

 

Digiprog3

Digiprog 3 work fine ,
First ESZ KM and seconds dash bord KM change.

If it is full color dashbaord, digiprog3 cannot do it.

If it’s not facelift model (so before 2013) and use digiprog 3 v4.94, then you don’t need can filter/blocker.
But a can blocker is better to use all times, because if dealer reads the EZS it shows same mileage as in tacho, if you don’t use can blocker then EZS shows 999999km.. (but normally dealers don’t read EZS, they only read ‘assyst manager’ when serviced).

To change mileage you need to use option ‘EZS’ in menu of mercedes w212 of digiprog III.. then it blocks ezs and changes tacho automatically.

If you roll back odometer to a lower mileage off last service, its best to delete service history in car. use option ‘assyst manager’. enter ‘744’ days and ‘25000’kms for next service warning, and press ‘V’ when it asks to delete service history.

When you have a diesel it probably gives DPF error in car. and the car will run in emergency-mode, only drives max 80kmh. digiprog can’t reset this. You have to go to dealer or someone else who can reset dpf.

When some other errors turn up in display use the ‘clr error’ option to reset.

no tool will lower mileage on the EZS, but Diagprog3 or AVDI will flash the Sam to fool Star Diagnosis and instead of read the mileage of EZS will show the mileage of dash.

 

 

OBDSTAR Odomaster

mercedes w212 obdstar odomaster full changes the mileage without any problem.

 

if mileage goes back to old value after correction, here is the OBDSTAR engineer solution:

After working on the car’s odometer for 16 km. And then reprogram the meter, the correction is done. You need to walk the car 16 kilometers, and then reprogram it.

 

Odomaster support mileage correction for following Mercedes chassis.

*If it says unknown software, this version is not yet supported.

Yanhua Mini ACDP Clear BMW F Chassis 8HP EGS ISN

Yanhua Mini ACDP module 11 supports both BMW E series and F series 8HP EGS ISN clear function.

Here is the guide to clear F chassis 8HP EGS ISN. 

Install BMW EGS interface board

Short the CAN resistor on the OBP ICP adapter to the "CAN R JOIN" side

Connect OBP adapter with ACDP

Power up the ACDP host

Run ACDP software

Confirm the ACDP host is properly connected

Select BMW->EGS-> 8HP ISN Clear (Support F chassis)->Clear ISN

Make sure that the ACDP device is connected to the EGS module

Press OK

Confirm that the EGS supports clearing ISN and ISN is not cleared

Start to program EGS module, keep the voltage at least 13.0V during the programming process

Auto backup data

Verify and write coding data

Clear ISN data successfully

Save new EGS ISN data

Check EGS Status, it is now cleared. 

How to Virgin Fiat Marelli 59F with FVDI Clone?

 How to read Fiat iaw59f eeprom to immo off?

No Immo off, just virgin.
You can virgin it with AVDI original, FVDI clone.
FVDI clone is discontinued and replaced by the SVCI 2020

Fvdi/SVCI read but don’t make virgin file.
read by fvdi make a virgin by dump and write by fvdi.

Here is an example of making virgin Marelli 59F (-2014) with FVDI/SVCI.

Connect Marelli IAW 59F module with svci follow the bench wiring diagram here

Run SVCI software, select Fiat software

Select Engine Control Unit, you can see immobilizer status is Active

Select Read/Write EEPROM function-> Marelli IAW 59F

Read EEPROM

Read EEPROM successfully

Select Make Virgin

Write EEPROM

Operation completed successfully

Switch ignition off for 2 minutes

Done.

Top 3 Tools to Clone BMW ZF 8HP Gearbox

 What is the cheapest tool to clone BMW ZF 8HP gearbox?

 

1. Yanhua Mini ACDP + Module 19

Yanhua Mini ACDP 19 is made for SH725XX ZF 8HP Gearbox Clone. It only works with BMW ZF 8HP, but also for Jaguar, Land rover, VW/Audi, Rolls Royce, Porsche, Bentley, Aston Martin, Lamborghini, Maserati, Dodge, Jeep, Chrysler, etc.

Function:

Full Backup Data
Full Write Data
Read MAPS
Read INT EEPROM
Write MAPS
Write INT EEPROM

Wiring diagram

Method 1:

  

Method 2:

 

Here is the ACDP BMW ZF 8HP cloning guide

Yanhua Mini ACDP BMW ZF8HP Clone Done in Car Success

 

 

2. CG FC200

FC100 software 1.0.1.0 adds all ZF_8HP gearbox computer clones: Alfa Romeo, Alpina, Aston Martin, Audi, Bentley, BMW, Chrysler, Dodge, Great Wall, Iveco, Jaguar, Jeep, Lamborghini, Land Rover, Mann, Maserati, Porsche, Rolls-Royce, VinFast, Volkswagen

 

Function:

SH725XX gearbox computer clone: read and write MAPS, read and write EEPROM, backup data, and restore data.

 

Wiring diagram

There are 3 connection options via bench

3. Flex

Flex software 5.8.0.0 adds Full Bench Solution for BMW ZF 8HP gearbox.

Function:
BMW ZF 8HP45 Bench: Read / Write / Checksum Maps; Read / Write IntEeprom; Full Backup – Clone
BMW ZF 8HP70 Bench: Read / Write / Checksum Maps; Read / Write IntEeprom; Full Backup – Clone
BMW ZF 8HP76 Bench: Read / Write / Checksum Maps; Read / Write IntEeprom; Full Backup – Clone

 

NOTE:

Foxflash/KT200 will read and write BMW ZF 8HP via OBD and bench, but this protocol is not for cloning, only for tuning.