Foxflash Software Update Logs in January 2023

 Foxflash ecu programmer released some new updates in January 2023.

When you are online, the update will auto sync from the server to your side.

 

January 16, 2023

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,

– Complete reading and writing of EEPROM,

– Cloning,

– RIVERGIN function

January 20, 2023

– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782

With this update you will be able to fully read and write the following ECUs directly

from pinout without having to open them:

– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25

– FORD: MED17.0.7

– NISSAN: EDC17 C84

– RENAULT: ME17.9.20, EDC17 C84

– TOYOTA: MED17.9.52, EDC17 C47

January 26, 2023
foxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
foxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR

 

January 27, 2023

foxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write

foxFlash is now able to perform the following operations:

• OBD Read
• OBD Write

On the following ECU reference:

Denso Gen1 (76F00xx)

• Hino 4.0 VVT-i 147ch
• Lexus/Toyota 2.5 205ch
• Lexus 200H (1.8 E-CVT) 99ch
• Lexus 220d 177ch
• Lexus 250 (GSE20) 200ch
• Lexus 300 (3.0 V6) 204ch
• Lexus 330 (3.3 V6) 230ch
• Lexus 350 (3.5i V6) 275/300ch
• Lexus 400h (3.3i V6) 272ch
• Lexus 430 290ch
• Lexus 450h (3.5i V6) 292/299ch
• Lexus 460h (4.6 V8) 247ch
• Lexus 600h (5.0 V8) 394ch
• Toyota 1.0 (1KR-DE) 64ch
• Toyota 1.3 VVT-i 87/100ch
• Toyota 1.6 VVT-i 132ch
• Toyota 1.8 VVT-i HSD/TS 99/129/133ch
• Toyota 2.0 (1AZFE) 145ch
• Toyota 2.0 D4-D 116/126ch
• Toyota 2.0 DOHC 16v 156ch
• Toyota 2.0i 150ch
• Toyota 2.2 D4-D 136/150/177ch
• Toyota 2.4 (2AZFE) 160ch
• Toyota 2.5 205ch
• Toyota 2.5 D4-D 101/125/144/150ch
• Toyota 2.7i 161/188ch
• Toyota 3.0 D4-D 172ch
• Toyota 3.5 (2GRFE) 270ch
• Toyota 3.5i V6 266ch
• Toyota 4.0 V6 239/249/260/273ch
• Toyota 4.3 VVT-i 300ch
• Toyota 4.5 D4-D 272ch
• Toyota 4.5 V8 D4-D 198ch
• Toyota 4.6i VVT-i D-45 314ch
• Toyota 4.7 V8 280/288ch
• Toyota 5.0 VVT-i 295ch
• Toyota 5.7i VVT-i D-45 286ch
• Lexus GS 300
• Lexus GS 350
• Lexus IS-F
• Toyota Prius
• Toyota RAV 4
• Toyota Sequoia
• Toyota Tacoma
• Toyota Tundra
• Toyota Verso
• Toyota Auris
• Toyota Auris
• Toyota Avensis
• Toyota Camry
• Toyota Corolla (Verso)
• Toyota Crown
• Toyota Dyna
• Toyota Estima
• Toyota FJ Cruiser
• Toyota Fortuner
• Toyota Hilux
• Toyota Land Cruiser
• Toyota Mark X
• Toyota Optimo

Please connect the battery charger during OBD operation Like this

January 27, 2023

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )
Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

 

January 28, 2023

1. BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

2. Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V update

Support for all Delphi DCM6.2AP/A/C/V
foxFlash is now able to perform the following operations: on DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT
DCM6.2AP with JTAG_BOOT On the following manufacturer ECU’s:
Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong

 

How to update?

Just a note and reminder, any software updates will be done automatically when ready. FOXFLASH WILL AUTO UPDATE WHEN READY!!!

Just connect your tool and keep internet connect , open the manager and foxflash, it will auto update to your local.