WiFi JLR DoIP VCI is compatible with original SDD and Pathfinder software. But it uses it own driver. Here you can download software and driver for doip vci for free.
Note: The follow software and driver is for DoIP VCI clone (Item No. SP312).
Support Pathfinder for JLR 2017 up
Support SDD for JLR -2016
Support SDD online programming
Support Pathfinder online key programming
Support SDD engineering software
Support Pathfinder engineer software
Support EXML edit
Support VBF edit
Support SDD for JLR -2016
Support SDD online programming
Support Pathfinder online key programming
Support SDD engineering software
Support Pathfinder engineer software
Support EXML edit
Support VBF edit
Free Download SDD software for DoIP VCI
http://diagnosticdelivery.jlrext.com/idscentral
Free Download Pathfinder software for DoIP VCI
http://diagnosticdelivery.jlrext.com/pathfinder/Jaguar_Land_Rover_Connect_Updater_v2.exe
(it will take you about 2 or 3 days to download the complete data of PathFinder with network continuously.)
Or visit official website http://www.autosos.com.cn to download software
Go to Technical Support->SDD & Pathfinder Download, and download SDD or Pathfinder one by one
How to install driver for JLR DoIP VCI interface?
Free Download JLR DoIP driver VCI Manager(JLR) 19.04.28.exe
password: g0f0
Please pay more attention to the version of the DoIP VCI driver. It should always be the latest version. So you should update the driver without delay.
The above driver 19.04.28 driver is the current version (Aug. 2019). If newer version driver released, you can download latest version on official website as well (check picture below).
The connection of DOIP VCI
Connect with USB; (It’s easy)
Connect with WIFI; (You can choose the Wifi named “DoIP-VCI-11D4”, and the last four numbers are in random.)
The Connection between the DoIP VCI and computer
Following the picture below, open the VCI Manager and click the “connect”
Check the connection status with the computer.
When it shows a green check mark, VCI is detected
Update of DoIP VCI’ firmware.
Open“VCI manager”
Then click the “VCI Update”
Click the “Start” and you can check the update progress on the right
Attention:
When you click the “start”, vci cannot be interrupted or stopped. Otherwise the JLR DoIP VCI will be damaged. You can disconnect when it finished.
( If you have Pathfinder account you can login directly. You can contact JLR VCI factory engineer for help if you don’t have an account. Email: autosos@hotmail.com)
It doesn’t connect successfully if it shows “SIM” “SimFiles”, you should select the communication interface as “JLR-JLR-DoIP, D-PDU API by Bosch” and VCI serial “86004905”. Now you can use it for diagnosis.
Now Pathfinder software is ready to use.
No comments:
Post a Comment