If you want to copy a range rover remote with yanhua mini acdp and JLR module, the app says ‘put the unlocked working key on the bav-key adapter’. How to unlock a working remote and do you need to lock it at the end?
Don’t worry just put the working key in the BAV unit it just stops you from cloning this key. The key will be fine after.
How to unlock the original key with Yanhua acdp?
The purpose to unlock the original JLR key: If the original factory key is programmed and locked. If you want to program it again, you need to unlock it first. If the original car key is thought to be lost and deleted with a key programmer, and then found it again, it needs to be unlocked first and then programmed again.
Firstly, please prepare:
Have Yanhua Mini ACDP, OBP+ ICP adapter, 8PIN cable, interface board and key.
Take out the key circuit board to confirm the location of the test point.
Place the key on the interface board and tighten the studs.
Use an 8PIN cable to connect the interface board to the OBP+ ICP adapter and connect the adapter to ACDP.
Next is to operate with Yanhua ACDP APP.
Click on “Jaguar /LandRover/ “.
Click on “Key Refresh”.
There are 4 options:
315MHz YWX000071
433MHz 4E0U40247
433MHz 5E0U40247
433MHz YWX000061
Just choose one according to your key type, and then unlock it.
- Push the metal shell to the right.
- Confirm key code (for example 5E0U40247)
Alright, hope it helps!
Any questions and suggestions, contact at https://www.obdii365.com/.
No comments:
Post a Comment