Clone Renault Getrag DC4 TCU with Yanhua ACDP

 Yanhua Mini ACDP has released a solution for bench cloning of the Getrag DC4 TCUs installed in Renault and Ford DPS6 (Powershift) brand vehicles.

 

Tools required:

Yanhua Mini ACDP2/ACDP1 hots

ACDP Module 26 with License AA00 

 PTCU2 Cable from module 19

 

Procedure:

 

Power on the ACDP.
Run ACDP APP.
Make sure your ACDP device has been bound.
Select Module function- Reanult DC4 (TC1766) clone.

Hit Help to check the connection diagram.

Connect the original DC4 TCU module with ACDP.
Select Reanult DC4 (TC1766) clone function.
Step 1: Connect TCU.
Enable stable network connection and do not disconnect device during the process.
Verify the system information.
Read hardware type and chip ID.
Connect system finished. ACDP will save the system info. automatically.

Step 2: Read/Write data
Full Backup data.
Reading chip data.
Save full data.

Step 3: Disconnect.
Disconnect the original TCU.

Connect a donor Renault DC4 TCU with ACDP2.

Connect TCU.
Verify system info, hardware type and chip ID.

Select Read/Write data
Full Write data.
Select original TCU full data.
Write chip data.
Write data to the donor TCU successfully.

Disconnect the donor TCU.

Install the new TCU back to the vehicle.

 

 

 

FYI: Flex also supports full OBD and Bench programming of the Getrag DC4 TCUs installed in Renault and Ford DPS6 (Powershift) brand vehicles.