KT200 Read Hyundai Kia EDC17CP14 on Bench or Boot

 A KT200 user reported that he cannot read Kia Sorento edc17cp14 tc1796 on bench. Here’s the solution.

Solution:

You cant do this ecu in bench you need to to in boot. 

Autotuner or flex can’t read this ecu in bench mode either. Only boot.

 

Edc17cp14 Hyundai/Kia work perfect first step you need to get password from OBD, second step in boot mode before read or write you need to select password file.

 

KT200 or Foxflash Hyundai Kia EDC17CP14 boot mode instruction

BOSCH EDC17 CP14 [ TC1796 INT.F.] – Hyundai, Kia

Step 1: Read and Write ECU

Connect with the multifunction cable the following
pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1796

 

RED: + 12V 3
BLACK: GROUND 1
GREEN: IGNITION 87
BLUE: CAN-H 68
ORANGE: CAN-L 67

If the password error message appears at the beginning of the reading, proceed as follows:

 

Step 2: Password search

Disable the boot mode by unsoldering the gray wire. Connect the pinout below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD TPROT V11 KIA – HYUNDAI
→ Click on “Find Password” and follow the software messages.

Now that the password has been found it’s possible to read and write the control unit as described in STEP 1.