Yanhua Mini ACDP2/ACDP Module 31 recently free updated BDC 085 version key programming via OBD.
Function:
Add key
All keys lost.
Method:
OBD CAN Method
OBD DoIP method
Supported versions: 085.010.080/085.010.100/085.010.110/ 085.010.130/ 085.011.120
Here is an example of adding BDC (085 version) key by OBD via DoIP method.
Main steps:
1.Detect vehicle information
2. Obtain IMMO Data (Read coding data, Program/Update, Write coding data)
3. Add key
Procedure:
Detect vehicle info
Connect the ACDP device and vehicle via ACDP module 31 DoIP adapter
Run ACDP App, go to BMW->FEM/BDC->IMMO/Mileage->BDC OBD (F series Version 085)
Defect vehicle info and save data.
You can see swfl version is 085
2.Obtain Immo data
Select Obtain IMMO Data
Step 1: Reading coding data
Check vehicle info again and press Continue
Read and save coding data
Reading coding data finish
Step 2: Program/Upgrade system
Select Method 1 DoIP update
Start to get data from the server
Prepare to program
Program system
Save backup file.
Take a screen shot of key data
Step 3: Write coding data
Verify the coding status of the vehicle information
If it is lost state, click continue to restore it.
If it is in a normal state, click to exit.
Here coding is lost, press Continue.
Select coding data (file name with coding)
Writing coding until finished
3. Add Key
Press Help to check instruction
Connect the ACDP with vehicle via OBDII connector.
When you use Yanhua ACDP2, it is necessary to change the DoIP cable to OBDII extension cable.
Connect the BAV-Key adapter with ACDP2 properly.
Then place the working key into the BAV-KEY adapter
Select Add Key
Check vehicle coding status, make sure it is normal
Select key data (select file name with Syskeys)
Confirm the working key was placed in the BAV Key adapter
Save ISN data
Choose unused key position
Put the new key close to the emergency start sensing antenna position
Write key
Program key successfully.
Test the new key.
https://www.obdii365.com/service/add-bmw-bdc-085-key-with-yanhua-mini-acdp-via-obd.html
No comments:
Post a Comment