Yanhua Mini ACDP tech released new module 28 to clone ZF-9HP gearbox in boot mode. Supports Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox boot mode cloning.
Module features:
1. The interface board can be inserted blindly to align with the boot test point, no need magnifying glass for calibration or complex probe workbench operation.
2. Boot test point with pin detection function, data read and write safe and reliable.
3. The special interface board replaced the cable which is simple, efficient, safe, and reliable.
How to Clone ZF-9HP Gearbox with Yanhua Mini ACDP Module 28?
First of all connect interface with gearbox module follow the wiring diagrams
Step 2: Prepare ACDP host, OBD+ICP adapter, interface board, gearbox and other accessories required for operation.
Step 2: Confirm the location and definition of the test points for ZF-9HP gearbox computer
Step 3: Install the copper pillars
Step 4: Install the ZF-9HP boot interface board and lock it with copper pillars.
Step 5: Install the ZF-9HP port interface board to the gearbox interface
Step 6: Connect the ZF-9HP boot interface and the ZF-9HP port interface board with 8PIN cable
Step 7: Short the CAN resistor on the OBP+ICP adapter to the “CAN-R Join”
Step 8: Connect ACDP host, OBP+ICP adapter and ZF-9HP gearbox computer with 20PIN cable.
Run ACDP Mini App, go to Jaguar/Land rover-> Gearbox Clone->ZF-9HP (Boot)
Identify
Full read to backup data
Full write data
NOTE: For Honda, Fiat, Dodge and other models with 9HP gearbox, you enter same menu path as Jaguar Land rover.
https://www.obdii365.com/wholesale/yanhua-mini-acdp-module-28-zf-9hp-gearbox-clone.html
No comments:
Post a Comment