2024/12/24

Program Audi A6 2000-2006 All Keys Lost by VVDI2 and Godiag GT114

 Godiag released a new Godiag GT114 Audi K-line test platform for Audi A3/A4/A6 C5 IMMO2 IMMO3 K-line instrument clusters.  These Audi clusters are not possible with pogo pin to read immo data, you will need to read eeprom and write key.

godiag gt114

Here obdii365.com shows how to use the Xhorse VVDI2 and Godiag GT114 Audi K-line test platform to program Audi A6 C5 2000-2006 all keys lost in service mode by eeprom. The test platform is compatible with multiple programmer AVDI, Autel etc.

 

 

Procedure:

 

Main steps:

  • Read EEPROM & PIN
  • Write Key
  • Write new key data back to cluster
  • Learn key

 

Connect Godiag GT114 with VVDI2 and cluster

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 1
Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 2
Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 3
Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 4

Run vvdi2 software. Select Audi function.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 5

Connect to Instrument module and read DTCs.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 6
Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 7

Select Special Function->K-line instrument/immobox

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 8

Read EEPROM.

It will extract PIN code. The PIN is required to learn key later.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 10

Save eeprom data.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 10

Insert a Megamos 48 chip into vvdi2 key programmer. Don’t use xhorse super chip.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 11

Select Transponder Programmer function. Detect transponder information.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 12

Go to Immo Data Tool. Select Euro- Audi-A6- VDO, load EEPROM dump.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 13
Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 14

Then select a key position and make dealer key.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 15Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 17

Prepare dealer key successfully.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 17

Save new key data.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 18

Back to Audi software,  go to Special Function->K-line instrument/immobox

Load new key data file.

Then write EEPROM back to cluster.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 19

Last step is to learn key. Put the transponder chip into the induction area of Godiag GT114 Audi test platform.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 20

Go to Key Learn-Key Learn function

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 21

Input key number and PIN code (got in step 1) and press Learn.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 22

Switch ignition OFF for 5 seconds, then switch ignition ON. Press OK.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 23

Switch off ignition. Insert each key to ignition and switch on at least 2 seconds.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 24

Follow ignition ON/OFF strictly otherwise may fail to learn key.

Learn key successfully.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 25

Test the new key. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.

Program Audi A6 C5 Kline Key with VVDI2 and Godiag GT114 26

Put cluster back to vehicle and start car with the new key.

Done.



https://www.obdii365.com/service/program-audi-kline-key-with-vvdi2-and-godiag-gt114.html

No comments:

Post a Comment